MRT Beatmungsgerät pNeuton model A

Preis auf Anfrage

Lieferzeit ca. 10 Werktage

Artikel-Nr.: 20052

pNeuton model A transport ventilator with CPAP designed for critical care patient... mehr

Menü schließen

Produktinformationen "MRT Beatmungsgerät pNeuton model A"

pNeuton model A transport ventilator with CPAP

designed for critical care patient support

- Noninvasive or invasive ventilation

- Integrated, demand flow CPAP system

- Variable oxygen selection

- MRI compatible with remote alarm output

- Patient disconnect and low gas alarms

pNeuton is simple and versatile

pNeuton has simple-to-use controls – Tidal Volume,

Respiratory Rate and Pressure Limit – for volume-targeted

or pressure-limited ventilation. With a built-in high output

demand flow CPAP system, critical care ventilation needs

are optimized for spontaneous and mandatory breaths.

Operating without the need of electrical power, the ventilator

can care for the most difficult patients from the emergency

room to special procedures / MRI; for inter-facility transport

and wherever your patient may be located.

pNeuton has these unique performance benefits

- All pneumatic operation, no batteries or external power needed to provide ventilation

- Change modes to meet patient needs - CPAP face mask to invasive ventilation seamlessly and without interruption

- Low spontaneous work of breathing comparable to other critical care ventilators

- Integrated all-pneumatic alarm system with remote alarm capability keeps you alerted to patient circuit disconnects and a low gas supply

- Mandatory and spontaneous breaths at 100% or use 65% oxygen to prolong your oxygen tank transports

Description

• Pneumatically operated for use on pediatric and adult patients > 23 kg

• Demand flow system for spontaneous breathing to 140 L/min

• Pressures displayed on manometer

• Modes of Operation: CMV, IMV, CPAP, Pressure Limit

• Mandatory breath flow rate is fixed at 36 L/min

• MRI compatible: up to 3 T static field strength, 6.9 G/cm spatial field gradient, 300 V RF power, shielded

• Weight: 6.5 pounds (3 kg)

• Dimensions: 5"H x 10"W x 7"D (13 x 25 x 18 cm)

• Input gas requirement: 55 psi ± 15 psi (3.8 bar ± 1 bar)

• Meets International Standards for transport ventilators:

– ASTM: Ventilators Intended for Use in Critical Care (F 1100-90)

– ISO: Lung Ventilators for Medical Use, Part 3 (EN 794-3:1999)

Control Settings

• Mandatory Breaths ON or OFF

• Respiratory Rate 3 to 50 bpm

• Tidal Volume 360 to 1,500 ml

• Peak Pressure 15 to 75 cm H2O

• PEEP / CPAP 0 to 20 cm H2O

• Oxygen 100% or 65%

Audible and Visual Alarms

• All pneumatic alarm system (no batteries)

• Patient circuit disconnection

– Automatic reset when alarm condition resolves

– One minute silence / reset button

• Low oxygen inlet pressure (below 30 psi)

• Remote alarm output

Weiterführende Links zu "MRT Beatmungsgerät pNeuton model A"

Bewertungen lesen, schreiben und diskutieren... mehr

Menü schließen

Kundenbewertungen für "MRT Beatmungsgerät pNeuton model A"

Bewertung schreiben

Bewertungen werden nach Überprüfung freigeschaltet.